Mecal By Starn
Mecal By Starn
Crimping presses, crimping applicators and accessories
Mecal by Starn is the distributor and manufacturer of the entire Mecal product line in the United States and Canada. Applicators, Presses, Specialty Equipment, Cutter/Strip Accessories, Quality Control Accessories and Spare Parts for all of your Wire Harness Solutions. Mecal by Starn provides quick turn arounds with above average customer service.
Why Mecal?
- U.S. Based Manufacturing –
- Industry Leading Delivery Time of 3 Weeks or Less –
- Spare Part Delivery of 2 weeks or Less –
- Reverse Engineering Capabilities –
- No Premiums on Rush Orders -Terminal Applicators
MRS - Restyling Left Side Feed
DESCRIPTION
Restyling left side feed mini applicator
CRIMPING HEIGHT
(5.346") 135.8mm
STROKE
(1.575/1.18") 40/30mm
TERMINAL PITCH
(<1.06") < 27 mm
TERMINAL THICKNESS
(<0.047") < 1.2mm
WIRE SECTION
max 10mm2
FEEDING SYSTEM
Mechanical
WEIGHT
(8.6 lb) 3.9 Kg
DIMENSION (mm)
W 144 x H 145.5 x D 105
DIMENSION (")
W 5.66" x H 5.72" x D 4.13"
- For linked terminals, with thickness < 1.2mm., terminal pitch > 27mm.
- Mechanical side feed.
- Wire section between 0 and 10mm2.
- Feeding system for linked terminals on a reel to be unrolled left to right.
- Can be supplied either with a continuous or a four-pad regulating head.
- Non-resettable 7-digit cycle counter.
- Can be fitted to any crimping press having a crimping height of 135.8mm ± 0.02mm.
- Can be used in both manual and automatic configuration.
- Easy replacement of crimpers and anvils.
MRS - Restyling Left Side Feed
DESCRIPTION
Restyling pneumatic left side feed mini applicator
CRIMPING HEIGHT
(5.346") 135.8mm
STROKE
(1.575/1.18") 40/30mm
TERMINAL PITCH
> 27mm (>1.06") Max. stroke 35mm
TERMINAL THICKNESS
(<0.047") < 1.2mm
WIRE SECTION
max 10mm2
FEEDING SYSTEM
Air pressure 5/6 Bar - continous air (6mm air line)
WEIGHT
(9.02 lb) 4.1 Kg
DIMENSION (mm)
W 140.5 x H 145.5 x D 105
DIMENSION (")
W 5.53" x H 5.72" x D 4.13"
OPTION
Continuous regulating head.
(0.00039") 0.01mm resolution.
(0.106") 2.7mm range.
- For linked terminals, with thickness < 1.2mm., terminal pitch > 27mm.
- Pneumatic feeding-system.
- Wire section between 0 and 10mm2.
- Feeding system for linked terminals on a reel to be unrolled left to right.
- Can be supplied either with a continuous or a four-pad regulating head.
- Non-resettable 7-digit cycle counter.
- Can be fitted to any crimping press having a crimping height of 135.8mm ± 0.02mm.
- Can be used in both manual and automatic configuration.
- Easy replacement of crimpers and anvils.
MRF - Restyling End Feed
DESCRIPTION
Restyling end feed mini applicator
CRIMPING HEIGHT
(5.346") 135.8mm
STROKE
(1.575/1.18") 40/30mm
TERMINAL PITCH
(<1.06") < 27 mm
TERMINAL THICKNESS
(<0.047") < 1.2mm
WIRE SECTION
max 10mm2
FEEDING SYSTEM
Mechanical
WEIGHT
(8.8 lb) 4.0 Kg
DIMENSION (mm)
W 72 x H 145.5 x D 196.5
DIMENSION (")
W 2.83" x H 5.72" x D 7.73"
OPTION
Continuous regulating head.
(0.00039") 0.01mm resolution.
(0.106") 2.7mm range
- For terminals linked � end to end �, rolled over a reel, with thickness < 1.2mm, terminal pitch < 27mm, wire section between 0 and 10mm2
- Mechanical end-feed feeding system. Can be supplied either with a continuous or a four-pad regulating head.
- Non-resettable 7-digit cycle counter, and with both cams either for terminal feeding on upstroke or downstroke.
- Fitted to any crimping press having a crimping height of 135.8mm ± 0.02mm.
- Can be used in both manual and automatic configuration.
- Easy replacement of crimpers and anvils.
MRSPJ8 - Mylar Tape Mounted Terminals
DESCRIPTION
Restyling pneumatic left side feed mini applicator
CRIMPING HEIGHT
(5.346") 135.8mm
STROKE
(1.575/1.18") 40/30mm
TERMINAL PITCH
(>1.06") > 27mm Max. stroke 35mm
WIRE SECTION
max 10mm2
FEEDING SYSTEM
Air pressure 5/6 Bar - continous air (6mm air line)
WEIGHT
(9.02 lb) 4.1 Kg
DIMENSION mm
W 140.5 x H 145.5 x D 105
DIMENSION (")
W 5.53" x H 5.72" x D 4.13"
OPTION
Continuous regulating head.
(0.00039") 0.01mm resolution.
(0.106") 2.7mm range
*Patent Pending
MRFP - Restyling Pneumatic End Feed
DESCRIPTION
Restyling pneumatic end feed mini applicator
CRIMPING HEIGHT
(5.346") 135.8mm
STROKE
(1.575/1.18") 40/30mm
TERMINAL PITCH
(>1.06") > 27 mm Max. stroke 41mm
TERMINAL THICKNESS
(<0.047") < 1.2mm max 25mm2
WIRE SECTION
max 10mm2
FEEDING SYSTEM
air pressure 5/6 Bar
WEIGHT
(8.8 lb) 4.0 Kg
DIMENSION (mm)
W 79.5 x H 145.5 x D 157
DIMENSION (")
W 2.83" x H 5.72" x D 7.73"
OPTION
Continuous regulating head.
(0.00039") 0.01mm resolution.
(0.106") 2.7mm range
- For terminals linked � end to end �, rolled over a reel, with thickness < 1.2mm, terminal pitch 27-35 mm, wire section between 0 and 10mm2.
- Pneumatic end-feed feeding system. Can be supplied either with a continuous or a four-pad regulating head.
- Non-resettable 7-digit cycle counter, and with both cams either for terminal feeding on upstroke or downstroke.
- Fitted to any crimping press having a crimping height of 135.8mm ± 0.02mm.
- Can be used in both manual and automatic configuration.
- Easy replacement of crimpers and anvils.
FMP - Magnum End Feed
DESCRIPTION
Magnum pneumatic end feed
CRIMPING HEIGHT
(5.346") 135.8mm
STROKE
(1.575/1.18") 40/30mm
TERMINAL PITCH
not binding
TERMINAL THICKNESS
(0.047" to 0.059") 1.2 to 1.5mm
WIRE SECTION
max 25mm2
FEEDING SYSTEM
air pressure 5/6 Bar
WEIGHT
(16.3 lb) 7.4 Kg
DIMENSION (mm)
W 128 x H 145.5 x D 320
DIMENSION (")
W 5.04" x H 5.72" x D 12.5"
- Applicator for terminals linked � end to end �, with thickness between 1.2mm and 1.5mm, wire section up to 25mm2.
- Pneumatic end-feed feeding system.
- Exclusively fitted with a continuous regulating head having a resolution of 0.02 mm and a 2.7 mm range.
- Non-resettable, 7 digit cycle counter.
- Most of the wearing parts can be replaced without removing the applicator from the press.
- Can be fitted to any crimping press having a crimping height of 135.8mm.
LMP Magnum Applicator - Pneumatic left side feed
DESCRIPTION
Slide-feed magnum applicator
CRIMPING HEIGHT
(5.346") 135.8 mm
STROKE
(1.575/1.18") 40/30 mm
TERMINAL PITCH
not binding
TERMINAL THICKNESS
(0.047" to 0.059") 1.2 to 1.5mm
WIRE SECTION
max 25 mm2 (3 AWG)
FEEDING SYSTEM
air pressure 5/6 bar
WEIGHT
(16.3 lb) 7.4 Kg
DIMENSION (mm)
W 320 x 170 x H 145.5 x D 140
DIMENSION (")
W 12.5 x H 5.72 x D 5.51
LMP Magnum Applicator - Pneumatic left side feed
DESCRIPTION
Mini applicator designed to crimp end sleeve ferrules
CRIMPING HEIGHT
(5.346") 135.8mm
STROKE
(1.180/1.575") 30mm or 40mm
- Continuous regulating head.
- Applicable on all Mecal presses.
- Optional wire stand guide available.
MK - 4 Points Crimp Applicator
DESCRIPTION
Crimp small gauge 4-point crimp applicator designed to crimp loose end sleeve (tube) terminals.
CRIMPING HEIGHT
(5.346”) 135.8mm
STROKE
(1.180/1.575”) 30mm or 40mm
MAX TERMINAL WALL THICKNESS:
(.024”) .6mm
MAX WIRE SECTION
62 mm (10 awg)
- Designed to crimp loose End Sleeve (Tube) Terminals.
- End Sleeve Terminals on a reel.
- 7 digit piece counter.
- Micrometric crimping height adjusting.
- Crimp Force Analyzer can be used.
FMK - Heavy Duty 4 Points Crimp Applicator
DESCRIPTION
The FMK � Heavy Duty 4 Points Crimp Applicator is designed to crimp loose End Sleeve (Tube) Terminals. On demand it can process End Sleeve Terminals on a reel. The high quality level of parts manufacturing, combined with an accurate design and engineering, allows the Crimp Force Analyzer usage on the crimping Press. As in any other Mecal applicator an inviolable 7 digit piece counter, as well as a micrometric crimping height adjusting is included. To avoid faulty crimps, the FMK is equipped with a sensor to detect the correct terminal positioning. It can crimp up to a terminal thickness of 2mm and external diameter of 10mm.
CRIMPING HEIGHT
(5.346") 135.8mm
STROKE
(1.1580/1.575") 30mm or 40mm
TERMINAL PITCH
not / whit binding
TERMINAL THICKNESS
(until to 0.078") until to 2mm
WIRE SECTION
max 25mm2 (3 awg)
FEEDING SYSTEM
air pressure 5/6 Bar
WEIGHT
(16.3 lb) 7.4 Kg
DIMENSION (mm)
W 163 x H 145.5 x D 200
DIMENSION (")
W 6.42 x H 5.72 x D 7.87
- Depth sensor for proper placement of the contact.
- Independent regulation crimping, front easy access.
- Ability to process contacts with carrying strap from the reel from left to right and from right to left.
- Ability to handle semi-automatic contacts loose.
- Applicable to all versions of presses Mecal from model P107C.
- Clamping on sideburns and attacks than traditional coupling, as per standard Mecal.
- Quick and easy process for the replacement of crimping dies heavy duty 4 points crimp applicator FMK.
MRFSJ1 - Restyling with Manual Slide
DESCRIPTION
Loose piece manual / slide
CRIMPING HEIGHT
(5,346") 135,8mm
STROKE
(1.575/1.18") 40/30mm
WIRE SECTION
max 10mm2
FEEDING SYSTEM
Manual / Slide
TERMINAL PITCH
Loose
TERMINAL THICKNESS
(0.047") 1.2 mm
WEIGHT
(7.1 lb) 3.2 Kg
DIMENSION mm
W 79.5 x H 145.5 x D 157+60mm
DIMENSION (�)
W 3.13 x H 5.73 x D 6.18 + 2.36
MSEP/S - Two Post Die Pneumatic Side Feed
DESCRIPTION
Pneumatic side feed two-post die
CRIMPING HEIGHT
(7.48/8.346") 190/272 mm
STROKE
(1.968/1.575") 50/40 mm
TERMINAL PITCH
not binding
TERMINAL THICKNESS
(0.059") above 1.5 mm
WIRE SECTION
up to 75 mm2 (3/0 AWG)
FEEDING SYSTEM
air pressure 5/6 bar
WEIGHT
(37.4 lb) 17 Kg
DIMENSION (mm)
W 450 x H 210 x D 150
DIMENSION (")
W 17.7 x H 8.26 x D 5.9
- For big linked terminals rolled over a reel to be unrolled "left to right."
- Material thickness > 1.5 mm., wire section up to 75 mm2.
- Continuous crimping height adjusting system.
- Pneumatic "side-feed" feeding system.
- All wearing parts can be replaced without removing the applicator from the press.
- Can be fitted to any crimping press having a crimping height of 212mm (see Mecal press P104) or 190mm (see Mecal press P150 and P200).
- Cycle counter non available.
MSEP/F - Two Post Die Pneumatic End Feed
DESCRIPTION
Pneumatic end-feed two-post die
CRIMPING HEIGHT
(7.48/8.346") 190/212 mm
STROKE
(1.968/1.575") 50/40 mm
TERMINAL PITCH
not binding
TERMINAL THICKNESS
(0.059") above 1.5 mm
WIRE SECTION
up to 75 mm2 (3/0 AWG)
FEEDING SYSTEM
air pressure 5/6 bar
WEIGHT
(37.4 lb) 17 Kg
DIMENSION (mm)
W 170 x H 210 x D 450
DIMENSION (")
W 6.69 x H 8.26 x D 17.7
- For big terminals linked "end to end," rolled over a reel, with thickness > 1.5mm, wire section up to 75mm2.
- Terminal pitch non binding.
- Continuous crimping height adjusting system.
- Pneumatic "end-feed" feeding system.
- Wearing parts can be replaced without removing the applicator from the press.
- Can be fitted to any crimping press having a crimping height of 212mm (see Mecal press P104) or 190mm (see Mecal press P150 and P200).
- Cycle counter non available.
MSC - Extreme Two Post Die Loose Terminals
DESCRIPTION
Extreme Duty Two-Post Die
CRIMPING HEIGHT
190mm
STROKE
(1.968") 50 mm
TERMINAL PITCH
Loose
TERMINAL THICKNESS
> 1.5mm
WIRE SECTION
above 75mm2 (3/0 AWG)
FEEDING SYSTEM
Manual / Slide
WEIGHT
(44.85 lb) 20.4 Kg
DIMENSION (mm)
W 250 x H 270 x D 197
DIMENSION (")
W 9.84 x H 10.6 x D 7.75
- Die for big loose terminals with thickness above 1.5mm., wire section above 75mm2.
- Can be used for coining.
- Wearing parts can be replaced without removing the applicator from the press.
- Cycle counter non available.
- Must be used with Mecal P200 Crimping Press.
- Can be fitted with regulating head, .1mm resolution, 5.8 mm range.
MSES - Two Post Die Loose Terminals
DESCRIPTION
Two-post die with manual feeding slide
CRIMPING HEIGHT
(7.48/8.346") 190/272mm
STROKE
(1.968/1.575") 50/40 mm
TERMINAL THICKNESS
(0.059") above 1.5mm
WIRE SECTION
up to 75 mm2 (3/0 AWG)
FEEDING SYSTEM
Manual / Slide
WEIGHT
(29.9 lb) 13.6 Kg
DIMENSION (mm)
W 9 (without carter) 170 x H 210 x D 200
DIMENSION (")
W 6.69 (without carter) x H 8.26 x D 7.87
- For big loose terminals with thickness > 1.5mm and wire section up to 75mm2.
- Continuous crimping height adjusting system.
- Terminal is loaded by means of a manually operated system.
- Pneumatic "side-feed" feeding system.
- Wearing parts can be replaced without removing the applicator from the press.
- Can be fitted to any crimping press having a crimping height of 212mm (see Mecal press P104) or 190mm (see Mecal press P150 and P200).
- Cycle counter non available.
BUS BAR - Applicator
DESCRIPTION
Magnum style applicator
CRIMPING HEIGHT
(5.346") 135.8mm
STROKE
(1.180/1.575") 30mm or 40mm
WIRE SECTION
Up to 42 mm requires Mecal P107C press. Over 42 mm requires Mecal P040 press.
MAX WIRE SIZE
252 mm
MAX TERMINAL THICKNESS
(.059") 1.5 mm
- Continuous regulating head.
- Designed with a programmable cut off that postpones the cut until the desired number of crimps have been made up to 9.
- Requires 5 to 7 bars air pressure (72-100 lbs).
TT - Crimping Press
POWER
0.75HP) 0.55Kw
FORCE
2 Ton
STROKE
(1.57") 40mm
SHUT HEIGHT
(5.34") 135.8mm
WEIGHT
(95.6 lb) 41Kg
DIMENSION (mm)
W 200 x H 580 x D 300
DIMENSION (")
W 7.9" x H 23" x D 11.8"
CONFIGURATION
Manual / Automatic
POWER SUPPLY
110v
VOLTAGE
110v
SURFACE FINISHING
Light grey RAL7038
- Available either in semi-automatic (for bench-top use) configuration or in full automatic (integrated into a cut and strip machine) configuration.
- Very compact and light, its spheroidal cast iron, one-piece structure offers the highest rigidity.
- 40mm Standard stroke (others available upon request).
- Can be used with all mini-style applicators with standard T-coupling.
- CFA can be fixed as an option.
- 135.8mm ± .02mm shut height.
- Standard safety cover has a "door opening" style by means of a latch; a state of art certified security switch assures the conformity to the norms and international laws.
P107C - Crimping Press
POWER
(1HP) 0.75Kw
FORCE
2 Ton
STROKE
(1.57") 40mm
SHUT HEIGHT
(5.34") 135.8mm
WEIGHT
(189 lb) 85 Kg
DIMENSION (mm)
W 280 x H 860 x D 310
DIMENSION (")
W 11" x H 33.8" x D 12.2"
CONFIGURATION
Manual / Automatic
POWER SUPPLY
110v
VOLTAGE
110v
SURFACE FINISHING
Nichelatura chimica
- Available either in semi-automatic (for bench-top use) configuration or in full automatic (integrated into a cut and strip machine) configuration.
- 40mm Standard stroke (others available upon request).
- Can be used with all mini-style applicators with standard T-coupling.
- CFA can be fixed as an option.
- 135.8mm ± .02mm shut height.
- The JOG option allows the operator to manually step-by-step cycle the press.
- Variable stroke version also available (20mm to 40mm).
- Kits available to adapt different size applicators upon request.
P040 - Crimping Press
POWER
(2.5HP) 1.87Kw
FORCE
4 Ton
STROKE
(0.78") 20mm
(0.98") 25mm
(1.18") 30mm
(1.38") 35mm
(1.57") 40mm
SHUT HEIGHT
(5.34") 135,8mm applicators
(8.34") 212mm two post die
WEIGHT
(326 lb) 148 Kg
DIMENSION (mm)
W 360 x H1050 x D400
DIMENSION (")
W 14.1" x H 41.3" x D 15.7"
CONFIGURATION
Benchtop / Automatic
POWER SUPPLY
Man 3F / Auto 3F
VOLTAGE
400V / 230V / 480V
SURFACE FINISHING
Light grey RAL 7038
P080 - Crimping Press
POWER
(5.5 HP) 4.2Kw
FORCE
8 Ton
STROKE
(1.18") 30mm
(1.26") 32mm
(1.38") 35mm
(1.57") 40mm
(1.97") 50mm
(2.36") 60mm
SHUT HEIGHT
(5.34") 135.8mm mini e magnum
(8.34") 212mm two post dies
WEIGHT
(365 lb) 166 Kg
DIMENSION (mm)
W 380mm x H1100mm x D 420mm
DIMENSION (")
W 14.9" x H43.3" x D16.5"
CONFIGURATION
Benchtop / Automatic
POWER SUPPLY
Man 3F / Auto
VOLTAGE
400V / 230V / 480V
SURFACE FINISHING
Light grey RAL 7038
P120 - Crimping Press
POWER
(5.5HP) 4.2Kw
FORCE
12 Tons
STROKE
(1.18") 30mm
(1.26") 32mm
(1.38") 35mm
(1.57") 40mm
(1.97") 50mm
(2.36") 60mm
SHUT HEIGHT
(5.34") 135.8mm applicators
(8.34") 212mm two post dies
WEIGHT
(392 lb) 178 Kg
DIMENSION (mm)
W 380mm x H 1100mm x D 420mm
DIMENSION (")
W 14.9" x H 43.3" x D16.5"
CONFIGURATION
Benchtop / Automatic
POWER SUPPLY
Man 3F / Auto 3F
VOLTAGE
400V / 230V / 480V
SURFACE FINISHING
Light grey RAL 7038
P200 - Crimping Press
POWER
(12.5HP) 9.4Kw
FORCE
20 Ton
STROKE
(1.96") 50mm
SHUT HEIGHT
(7.48") 190mm
WEIGHT
(3410 lb) 1550 Kg
DIMENSION (mm)
W 900 x H 2600 x D 1400
DIMENSION (")
W 35.43" x H 102.36" x D 22.11"
CONFIGURATION
Manual
POWER SUPPLY
380/400 Vac - 3P + N presa 5 poli 32A cavo 5mm2
VOLTAGE
400V / 230V / 480V
SURFACE FINISHING
Light grey RAL 7038
- Crimp very big-section wires or to handle embossing process where pressure up and above 20 tons.
- Accepts Extreme Duty Two-Post Die MSCS, with specific adapting shank.
- Can also receive Two-Post Dies MSAS and MSAP.
- Crimping height of 190 mm.
- Regulating head which allows for a continuous setting of the shut height.
- 0.1mm resolution and a 3.6mm range.
- It is fitted with a 360° safety cover, the only open side of which is protected by a set of optical barriers.
- All the controls are placed on two external control boxes.
BCC/CSC - Bad Crimp Cutter/Carrier Strip Cutter
ID
BCC/CSC
BEST CFA FIT
TT1000
MAX TERMINAL THICKNESS
1.0 mm
MAX WIRE CROSS SECTION
6 sqmm
AIR PRESSURE
5-7 bar
DIMENSIONS
W 240 x H 195 x D 95
POWER SUPPLY
18V AC, 24V DC
DESCRIPTION
bad crimp cutter/carrier strip cutter
COMPATIBLE TO P107C, coupled with Mecal std applicators (different std available on request)
The BCC/CSC, Bad Crimp Cutter/Carrier Strip Cutter, is a sole electropneumatic device which chops the terminal carrier strip and cut any faulty crimped wire. The BCC function is activated when connected with the TT1000 CFA (Crimp Force Analyzer). When the CFA detects an error, the BCC pliers hold the wire and the BCC blades chop the wire just outside the crimped terminal. The wire can be therefore stripped and crimped again, avoiding that faulty crimps are released for assembling and saving the cost of scrapping a wire.
SC11 - Stripper Crimper
PART NUMBER
790000016
AIR PRESSURE
5 - 7
DIMENSION (mm)
W 212 x H 96 x D 98
DIMENSION (")
W 8.32" x H 3.78" x D 3.86"
WEIGHT
(11.2 lb) 5.1 kg
POWER SUPPLY
18 V AC. 24 V DC
WIRE SECTION
0.2-3mm2 (32-12 AWG) ø isolante max 4.5mm
STRIPPING LENGTH
(0.078 - 0.473") 2 - 12mm
JACKET STRIPPING LENGTH
(min 0.98" )* min 25*mm
- Wire-stripping unit that�s integrated with a crimping station (press and applicator).
- On one movement, wire is grabbed, stripped and moved over the anvil.
- Can strip wires up to 3mm2.
- Works with both end and side-feed applicators.
- Pneumatic actuating system grants ease of installation, use and maintenance.
- It can be cycled either by pedal or by a sensor that detects the presence of the wire.
SC12 - Stripper Crimper
PART NUMBER
790000023
AIR PRESSURE
5 - 7
DIMENSION (mm)
W 212 x H 96 x D 98
DIMENSION (")
W 8.32" x H 3.78" x D 3.86"
WEIGHT
(11.2 lb) 5.1 kg
POWER SUPPLY
18 V AC. 24 V DC
WIRE SECTION
0.2-6mm2 (32-9 AWG) ø isolante max 5.5mm
STRIPPING LENGTH
(0.078 - 0.473") 2 - 12mm
- Wire-stripping unit that�s integrated with a crimping station (press and applicator).
- On one movement, wire is grabbed, stripped and moved over the anvil.
- Can strip wires up to 6mm2.
- Works with both end and side-feed applicators.
- Pneumatic actuating system grants ease of installation, use and maintenance.
- It can be cycled either by pedal or by a sensor that detects the presence of the wire.
- Specifically designed to handle closed-barrel terminals.
SC19 - In Line Stripping Unit
PART NUMBER
790000030
AIR PRESSURE
5 - 7
DIMENSION (mm)
W 260 x H 120 x D 120
DIMENSION (")
W 10.2" x H 4.72" x D 4.72"
WEIGHT
(9.88 lb) 4.5 kg
POWER SUPPLY
18 V AC. 24 V DC
WIRE SECTION
0.2-2.5mm2 (32-13 AWG) ø isolante max 3.5mm
STRIPPING LENGTH
(0.078 - 0.473") 2 - 12mm
JACKET STRIPPING LENGTH
(min 0.78" )* min 20*mm
- Electro-pneumatic actuating system grants ease of installation, use and maintenance.
- It can strip a wire up to 2.5 mm2.
- Cycled either by pedal or by a sensor that detects the presence of the wire.
- Can be coupled to end-feed mini applicators or side-feed mini applicators.
- Can be used with multiple-core wires.
- When crimping side-feed terminals linked by front carrier, the minimum jacket stripping length is 20mm.
- Side-feed terminals the mini-mum jacket stripping length is 15mm.
- Quick set-up time and easy maintenance.
BCC - Bad Crimp Cutter
- Pneumatic device operated with a CrimpForce Analyzer on a Crimping Press.
- Cuts the crimped terminal from the wire when the CFA detects a faulty crimp.
- It assures that no faulty crimps can be used for the final assembly.
TBPR - Heavy Duty Carrier Strip Cutter
PART NUMBER
790000023
AIR PRESSURE
5 - 7
DIMENSION (mm)
W 212 x H 96 x D 98
DIMENSION (")
W 8.32" x H 3.78" x D 3.86"
WEIGHT
(11.2 lb) 5.1 kg
POWER SUPPLY
18 V AC. 24 V DC
WIRE SECTION
0.2-6mm2 (32-9 AWG) ø isolante max 5.5mm
STRIPPING LENGTH
(0.078 - 0.473") 2 - 12mm
PSHRS - Press Shut Height Regulating System
- Allows a quick variation of the lower dead point of the PI07C press.
- Total range is 2.7mm. with 0.03mm. increment.
PWO7 - Paper Winder
- Electric device to unroll and collect the paper from the terminal reel.
- Installed on the terminal reel arm.
PWDO7 - Paper Winder & Dereeler
- Collect the paper of terminal reel and unrolls the terminal strip very smoothly.
- Terminal positioning on the anvil is constant, allowing a perfect crimping geometry.
QCBP - Quick Change Base Plate
- Allows an easy clamping (and removal) of the Mini Applicator
- Fits almost any existing Mecal Press
- Specific version to accommodate the SCII / SCI9 module is also available
MBS-10307 - Slug Puller
- Don't hurt the wire or your fingers anymore.
- This lightweight easy to use tool was designed for pulling off the slug of a precut but not fully stripped wire.
- Made of a durable plastic to help guard from damage to the wire.
- Use for a wide range of wire gauges and insulation coatings.
