// Nitronic

www.Nitronic.ch

Nitronic is an international provider of industrial products. For more than 30 years, Nitronic has developed electronic/micro-electronic controls and mechanical solutions for cable processing.

Nitronic was founded in 1977. It originally developed and manufactured electronic instruments. Its core areas were medicinal technology, high voltage technology, and systems engineering.

In 1984 Nitronic began developing and producing the world-renowned Schleuniger wire stripping machines for:

  • Coaxial cables: CO207, CO257, CO8015, HC207, MP257, MP8015
  • Microcoaxial cables: MC252
  • Semi-rigid cables: SR1000
  • Fibre optic cables FO7045, FS7030, FS7035

Many years of experience, flexibility and the acquired know-how, allowed the company to expand its product range to mechanical products. This led to further products and services that Nitronic sells throughout the world via selected partners:

  • ST215W, new stripping machine for small cables or microcoaxial cables
  • ST730T, new coaxial cable stripping machine with touch screen and microcoax mode for smaller coaxial cables
  • WinCoax, a new PC-Software for all Schleuniger “MP” machines e.g. MP 257
  • The HRC3070, a portable metal hardness measurement device, the size of a ballpoint pen.
  • The Nitronic Ministrip, a high-precision wire stripper tool for thin wires.
  • Our services also include the procurement of complex, high-precision mechanical products.

His­to­ry

Ni­tron­ic was found­ed in the Swiss town of Ni­dau in 1977. For the first 10 years, Ni­tron­ic had de­vel­oped and man­u­fac­tured elec­tron­ic in­stru­ments for nu­clear re­search­ and the med­i­cinal in­dus­try. Ni­tron­ic en­tered into the ca­ble pro­cess­ing in­dus­try in in 1984 with the co­op­er­a­tion of Ste­pan En­gi­neer­ing.. This re­sulted in the world­s first coaxial ca­ble strip­ping ma­chine CO207. Fur­ther models fol­lowed and set a new standard in ca­ble pro­cess­ing.

  • Coaxial cables: CO207, CO257, CO8015, HC207, MP257, MP8015
  • Microcoaxial cables: MC252
  • Semi-rigid cables: SR1000
  • Fibre optic cables FO7045, FS7030, FS7035

Th­ese prod­ucts were dis­tribut­ed ex­clu­sive­ly by Sch­le­u­niger Switz­er­land.

In 2005 Ni­tron­ic released its high pre­ci­sion strip­ping tool the Min­iStrip, which was the first to be dis­tribut­ed by Ni­tron­ic’s own dis­tri­bu­tion net­work. It was fol­lowed by the ST215 and ST215W wire stripping machines as well as the redesigned ST730 & ST730T coaxial cable strip­ping machines. To­day Ni­tron­ic has a world­wide sales- and ser­vice net­work.

An im­por­tant ad­di­tion to the busi­ness was made in 2004, with the launch of the portable hard­ness tester HR­C3070. The in­no­va­tive con­struc­tion and mea­sur­ing prin­ci­ple al­lowed Ni­tron­ic to build a tester in the shape of a pen at a rea­son­able price. This is the most com­pact hard­ness tester on the mar­ket!

In 2008, Ni­tron­ic was con­vert­ed to a non-stock cor­po­ra­tion Ni­tron­ic AG. Fur­ther­more, Ni­tron­ic moved to its new lo­ca­tion at the Mat­ten­s­trasse.

If you have any questions, please don’t hesitate to contact us.

 

Products:

 

ST730T –Fully automatic coaxial cable and wire stripping machine with touch screen and Micro-coax mode

DOWNLOAD ST730 PDF (115 KB)

Description:

The ST730T not only meets, but exceeds all the requirements for a flexible wire processing machine. Stripping of coaxial or triaxial cable is a breeze for the ST730T to handle. Of course, multi-conductor cable or single wire with special insulations such as Kapton or Teflon can also be processed.

Set up times are eliminated because when selecting stored cable parameters, the machine sets itself up! The job is further simplified through the built in counter and the ability of setting program sequences. The safe and easy operation via the key pad or colorful touch screen allows for quick and reliable machine settings when changing to a different cable program. Stripping parameters can be protected by selecting a password, this can be accessed through authorized personnel.

Options available are: WinCoax PC Software for data storage and archiving. This software is compatible with both the Nitronic ST730T and Schleuniger MP machines.  Also, a Foot pedal option is available

The stripping machine ST730T definitely impresses, due to its high precision, quality workmanship, longevity and it guarantees the highest flexibility with repeatable productivity!

 

 

ST730

 

Range of Applications

Coaxial cable processing, Triaxial cable processing,  for all industries including the aviation and aerospace industries.

 

Examples Of Use

Stripping of coaxial cable in up to 9 steps, with or without semi strip including way-back function.

 

Features

  • Outer cable diameter  max 7 mm (0.28’’)
  • Stripping length up to 30 mm (1.18’’)
  • 99 program storage
  • Adjustable diameter feed rate
  • Adaptive clamping force
  • Wayback or partial strip
  • Sensor activated start cycle
  • Foot pedal activated start cycle (optional)
  • Left or right rotation/twisting
  • Suitable for Teflon and Kapton and other hard to strip insulations
  • RS232 interface
  • 100, 115 and 230VAC power supply

 

Options

  • WinCoax Software for Data backup and for visualization
  • Foot pedal
  • Made in Switzerland

 

 

ST215 / ST215W – Stripping and Twisting machine

ST215/ST215W PDF (246 KB)



The cable Stripping and Twisting machine ST215 and ST215W (with wayback) was specially developed for small wires and cables. It features an innovative four-blade system, which provides very accurate and exact repeatable stripping results.

The coating is removed by cutting with rotating blades and strip-off in one single step. This innovative procedure allows processing of

  • Coax/Microcoax cables
  • Teflon or Kapton coated cables
  • Sucoform SM86 cables from Huber & Suhner

Furthermore, wires are twisted during the stripping process. The high precision avoids damage to wires or dielectric. In addition, a centering unit allows very high precision stripping for high-end applications. The centering unit is infinitely adjustable and assures that the cable is centered respectively to the cutting blades. User influences regarding the stripping quality are eliminated.

Precision blade diameter control with a micrometer scale, allows a quick set-up of diameter. The locking screw of the diameter adjusting system makes the machine available even for military and aerospace applications. The quick length control is equipped with a sensor which initiates the stripping process. The high quality of the product guaranties a precise repetitiveness.

The all new ST215W features two additional functions.

– The rotation of the stripping head can be stopped prior to pull-off. This allows to twist or not the strands.

– The second new function is the adjustable Wayback. This function will open the blades a little prior to pull-off. This increases the stripping quality, especially when the wires have important diameter tolerances.

 

 

 

Nitronic MiniStrip –Cable Stripping Tool

Ministrip PDF (1.59mb)

The cable stripping tool Nitronic MiniStrip was specially developed for thin wires and cables. It features a four-blade system, which provides exact repeatable results for stripping wires and cables.

The coating is removed by rotating blades and stripped-off in one single step, depending on stripping length and cable, the wires are also twisted. This innovative design allows for processing fiber optic cables as well as coaxial cables and Teflon coated cables. The high precision design prevents damage to wires or fibers.

Precision blade diameter is controlled with a micrometer, which allows for a quick set-up of diameters. The locking screw of the diameter adjusting system makes the tool available even for military applications (mil-spec). The high quality construction of the ministrip guarantees a precise repetitiveness.

Features

  • Wire size ranges from 0.16 mm (0.006”) to 1.5 mm (0.06”) (18 – 38 AWG), depending on insulation-type, down to 0.10 mm (0.004″) 38 AWG
  • Outer cable diameter max. 2.5 mm (0.1’’)
  • Stripping length up to 15 mm (0.6’’)
  • Four cutting blades on one single plane
  • Rotating cut
  • No wire damage
  • Fast and easy change of length and diameter settings
  • Mobile, no power supply
  • HSS blades can be replaced by user without tools
  • Suitable for Teflon, PVC, Kynar and Kapton insulations
  • Attractive price

 

Centering unit

The new centering unit allows for very high precision stripping especially for high-end applications. It is available as an option for the Nitronic MiniStrip. The centering unit is infinitely adjustable and makes sure that the cable is perfectly centered to the cutting blades. This involves the following advantages:

  • The user cannot influence the stripping quality
  • The stripping diameter can be adjusted very close to the conductor, dielectric or shield. In this way very thin insulations can be stripped.
  • Wire damage is prevented

 

Bench Clamp

For production use we developed an aluminum bench clamp for the Nitronic MiniStrip. This elegant accessory is equipped with a special plastic, which will not damage the MiniStrip

 

Made in Switzerland

The MiniStrip is developed and manufactured in Switzerland by Nitronic AG. For more than 20 years, Nitronic has developed electronic / micro-electronic controls and mechanical solutions for cable processing.

 

 

 

 

For more info please contact:

Info@tenborgtechnologies.com

Ph: 949-678-0128


Discussion

No comments yet.

Post a comment

Categories

Twitter